IMORDEN Carbon Fiber S-40c Handheld Camera Stabilizer Review

IMORDEN Carbon Fiber S-40c Handheld Camera Stabilizer Review
Spread the love

Small cameras are a great gadget to have when traveling and casually filming, but they can get a bit shaky if held by hand or with a stick mount. It is a good thing that there are actually camera stabilizers for such small cameras these days.

Features:

  • Weight capacity of .5 to 2.3 pounds
  • Adjustable height and angles
  • Easy to set up, with quick release plate
  • Comfortable handle
  • Lightweight

Advantages:

Whether you are a Go-Pro or a DSLR camera owner, you will definitely appreciate the IMORDEN Carbon Fiber S-40c Handheld Camera Stabilizer.

Since many cameras are built to be compact and lightweight these days, this weight capacity is just about enough to hold the weight of a camera, its lens, as well as other accessories such as a small microphone or light.

If you are a traveler and would want to document your trips in high professional quality, you will definitely need a camera stabilizer such as this.

The height of it is adjustable so that whatever camera you choose to use, you can definitely easily fit it with this camera stabilizer and comfortably use it since it can accommodate heights anywhere from approximately ten to sixteen inches. You can also shoot at any angle since this is also easily adjustable with this camera stabilizer.

There are a lot of things you could do and capture with the help of this handheld camera stabilizer and right at the grip of your own hands with no need for mounts or tripods or supports that could only mean additional baggage for you, especially when you are on the move.

Another advantage the IMORDEN Carbon Fiber S-40c Handheld Camera Stabilizer has for you when you are out and about is its quick and easy setup. It is so easy to use that you can set it up in just a matter of minutes. It even comes with its own quick release plate that will allow you to quickly mount and dismount your camera depending on when you need to do so.

This could be greatly useful if you are shooting different locations in one day and need quick access to your camera on and off the stabilizer.

You can simply pop it on and off as needed with a snap and two seconds so that no amount of time is wasted in screwing and unscrewing the unit onto the mount. You can go and shoot anytime anywhere.

The inner diameter of the handle on this stabilizer is about 16 millimeters. It has not only been built out of a whim but specifically and especially researched, developed, and manufactured so that it is ergonomically sound for a videographer to use.

Because of this, you can be assured of utmost comfort when holding the device, even for prolonged periods of time. So much thought and science had been put into this product that the manufacturers have made sure that not only is it a good product but also a comfortable and healthy one to use.

No hand cramps, wrist strain, or even shoulder neck and back strain with this stabilizer as it is built not just to stabilize your shots but also to promote comfort and utmost convenience for its user no matter the situation.

There’s another thing that makes the IMORDEN Carbon Fiber S-40c Handheld Camera Stabilizer quite the most comfortable camera stabilizer there is. It’s built to be super lightweight with its carbon fiber shaft material.

Alone, it weighs just a tiny bit above one kilogram. It comes with counterbalance weights as well should you need to balance your camera in a setup.

It comes with two 100 gram counterbalances for your standard DSLR cameras, and four 50 gram balance weights for smaller and lighter cameras such as a go-pro or even a smart phone since these devices themselves are also capable of capturing high-quality images, especially for non-professionals who only want to have high-quality recordings such as vlogs or travelogs.

Disadvantages:

There seems to be a lot of spinning going on with this unit, as per some of its critical reviews. There have been complaints about the quick release plate not adequately holding the camera, and some other parts that need to be reinforced in order to just accommodate a camera without spinning off.

Also, since it is built for lighter cameras such as phones and Go-Pros, you can expect that it will not be able to accommodate bigger video cameras in case you own those professional types.

Verdict:

Such a great product to have if you are a small camera owner.

Leave a Comment:

Leave a Comment: